Despite
you can use different guide bar son the 445, we recommend you to use
13” to 20” bars so you can opt for the most suitable for your
cutting requirements, but keep in mind that the saw is best suited
for 16” to 18” bars. You should also note that this model has a
single nut attachment, but this shouldn’t be a problem since it was
designed for homweoner rather than professional use.
The
nose sprocket of the bar should be greased regularly to prevent the
Wheel seizing or failing to operate prorperly as seen in this husqvarna 445 review. You just have to
insert the grease from a grease gun into the sprocket holeo n the
guide bar on a regular basis, and you can buy a greasing gun for lees
than $10.
The
chain must be kept properly tensioned at all times. If you need to
tension the chain you just have to use the combination tool to adjust
the chain tensioning screw on the outside of the saw. This shouldn’t
take more than a few seconds, but as we have mentioned above, you
could find more information in the user’s guide.
Finally,
the chian should be kept sharp in order to ensure optimum cuttingperformance and you should follow the user’s manual.
Design and Construction
The
445 is made of hard durable plastic to help keep the weight to a
mínimum and avoid corrosion, and it’s forged three piece
crankshaft improves durability.
No comments:
Post a Comment